Home / Blowers / MAP-AS

MAP-AS

Area of application: low capacity and medium pressure.

Type of blades: forwardcurved blades, type “sirocco”.

Application: for clean and slightly dusty air, widely used for cooling of lamps, motors, for ventilation of boilers and small ovens and also for air supply into gaz-burners and solidfuel boilers.

Temperature of the fluid: till 80°C for standard execution, for higher temperatures special execution of the blower is required.

Construction’s specification: stable construction made of sheet metal. Blower is covered by powder paint, baked at 200°C with the average thickness of соating 70 mc, the impeller is made of galvanised steel.

Blower is statically and dynamically balanced.

Impeller and motor produced in Italy, correspond to quality norms of EU.

Series MAP-AS manufactured by Italian producer, assembled by Aton service LTD.

Unit of supply: blower execution Es 5 (direct drive, without supporting frame),protection screen on the inlet, electric motor IP55, class of isolation F.

Options and special executions: execution Es4 (direct drive, motor on the supporting frame), execution for high temperatures, sparkproof execution, etc.

Name Air delivery, m3/hour Total pressure, Pa Motor size Power, kWt  Revolutions, rpm Noise level, dB Weight, kg
MAP-AS 200/0,18 100-350 900-1120 63 0,18 2800 61 7,5
MAP-AS 250/0,37 150-450 1250-1580 71 0,37 2800 67 14
MAP-AS 250/0,55 150-500 1250-1570 71 0,55 2800 67 15
MAP-AS 280/0,55 200-500 1600-1870 71 0,55 2800 70 16
MAP-AS 300/0,75 250-700 1860-2200 80 0,75 2800 74 21
MAP-AS 300/1/1,1 250-800 1860-2200 80 1,1 2800 74 22
MAP-AS 350/1,5 300-800 2550-2760 90 1,5 2800 79 30
MAP-AS 400/2,2 350-1100 3380-3890 90 2,2 2800 82 33

 

Останні Blowers